Following Jesus – Making Disciples – Changing the World

Activity (Page 36096)

  • Pagh Rivers posted an update 4 months, 1 week ago

    There are several categories of welding used to participate materials together. We will be talking about the welding of metal to metal and steel to steel.

    The most typical forms welding are:

    Wire feed welding – which some people label mig, mag, gasless or flux cored.

    Arc welding – also known as stick welding

    Tig welding –

    Gas welding

    Spot welding

    Wire feed welding can be known as MIG welding. The correct term is GMAW or Gas Metal Arc Welding. When using this welding technique you possess a torch or gun inside your hand and squeeze a trigger. When you squeeze the trigger, wire in the torch will begin to come out. This wire might be pointed at what you look for to weld.

    The technical good name for arc welding is SMAW or MMAW. This really is Shielded or Manual Metal Arc Welding. On this occasion you use an electrode that is simply a length of filler wire that’s an average of about 1 foot long and it is covered in the flux. When you use the rod up the flux will burn off and make a shielding gas that protects the weld.

    Tig welding is an extremely fine and delicate welding technique. Because of this you’ll want to hold you torch in a hand and use a filler rod in the other. The concept is basically that you slowly feed the filler rod in to the weld as you go. You are able to weld with TIG or GTAW, Gas Tungsten Arc Welding without needing the filler rod and just just melt the 2 pieces of metal together. This is called "fusing", where while using heat from arc you melt and fuse it together.

    Along with the last different sort of welding that you’ve is named "spot welding". This is often employed for sheet metal fabrications. As a brief explanation the 2 components of metal that ought to be joined are placed between your electrodes for the ends in the arms with the unit. They are offered together as well as the welded part will likely be between those points. It is just usually a second possibly even for this to happen. Just a buzz and done. This is a extremely fast means of joining sheet metal parts. Things like toolboxes are a great demonstration of so what can be and they are spot welded.

    Additionally, there are all kinds of other a variety of welding systems for metal like friction, ultrasonic, thermite and sub arc simply to mention a few.

    But by far those mentioned above would be the most typical today.

    More info about

    Khuon han tiep dia take a look at this popular web site.

Skip to toolbar